|
VARISTORS PROVIDE HIGHER SURGE CURRENT CAPABILITY |
|
 EPCOS has developed the LS41 and LS42 series of varistors with higher surge current capability. They are designed for surge voltage protection in industrial and consumer electronics. Both series have retained the dimensions of the existing series LS40 of 37.5 x 46 mm2 (W x H). The surge current capability of the LS41 was increased by 25%. It is now 50 kA at a pulse form of 8/20 µs.
|
|
Read more...
|
|
|
OPEN-PHASE/PHASE SEQUENCE INDICATOR |
|
 Sterling Instruments has introduced the Safety Fused Open-Phase/Phase Sequence Indicator, Model PSI-8031FC. The model comes with three safety color-coded fused test lead/crocodile clip assemblies. The color-coded fused assemblies follow the standard practice to use red, white and blue leads/clips, making it easier to correctly connect the clips to the ac power lines.
|
|
Read more...
|
|
|
FIBRE OPTIC ACCESS AND PERIMETER SAFEGUARDING |
|
 Banner Engineering Corp. has introduced PICO-GUARD Fiber Optic Safety Grids for personnel safety and equipment protection applications. Designed for use with the PICO-GUARD Fiber Optic Controller, the Grids are said to provide a reliable optically based, non-contact solution for perimeter and access guarding and are rated for use in explosive environments.
|
|
Read more...
|
|
|
DIGITAL FIBRE OPTIC SENSOR |
|
 Panasonic Electric Works Corp. of America has introduced the FX-100 Series from SUNX. The design features a 9 mm width and integrated mounting holes for installation in a variety of applications. The four chemical, visible red LED used for the emitter is said to ensure long life operation and high-powered sensing.
|
|
Read more...
|
|
|
HAND CONTROLS FOR VEHICLES |
|
 TCH Series electronic, industrial hand controls are now available from Tuthill Controls Group for a wide range of control applications. The electronic controllers can be integrated into vehicle design, and any application that uses a conventional contact potentiometer hand controller can be replaced with a Tuthill Controls electronic hand controller to increase reliability and performance.
|
|
Read more...
|
|
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
You are not authorised to view this resource.
You need to login. |
Endevco Corp. has introduced the model 7285 piezoresistive accelerometer for vehicle crash, crush zone and impact testing. With a weight of <1 g and a 2000 g full-scale range, the unit is said to use a high-output, micro-machined, monolithic sensing element which features integrated mechanical stops to deliver the most rugged, reliable and trusted measurement data available for crash test applications. 
