Products of the Day
|
 AutomationDirect’s new IronHorse permanent magnet DC 56C-frame motor line features totally enclosed non-vented (TENV) and totally enclosed fan-cooled (TEFC) models. The motors are constructed of a rolled steel frame with cast aluminum end bell, and are available in sizes ranging from .33 to 2HP. IronHorse DC motors are ideal for applications such as conveyors, turntables, and whenever adjustable speed, constant torque, dynamic braking and reversing capabilities are needed.
|
|
Read more...
|
|
|
Screw driven linear actuator |
|
|
 Bishop-Wisecarver Corporation announces the availability of the new HepcoMotion PSD80 Profile Screw Driven Linear Actuator with high efficiency Herculane wheel technology. Designed to complement the established PSD120 ball screw actuator, PSD80 was primarily developed around the need for a cost effective Z axis solution in lighter load applications such as pick and place and assembly operations.
|
|
Read more...
|
|
|
Load support For hydraulic motors |
|
|
 Zero-Max overhung load adaptors (OHLA) provide load support to eliminate premature hydraulic motor or pump bearing failure. OHLA’s provide a solid mounting surface while sealing out dirt and contamination in harsh environments.
|
|
Read more...
|
|
|
Multifunctional process monitor/controller |
|
 Novotechnik’s MAP 4000 Series features include programmable input selection and mathematical functions as well as up to four limit switches, and analog outputs.
|
|
Read more...
|
|
|
Smart Power Relay now available in 30 A version |
|
 E-T-A Circuit Breakers has introduced a 30 A version of the E-1048-8 Dice Smart Power Relay, a remotely controllable electronic load disconnecting relay, matching standard four pin automotive relay sockets.
|
|
Read more...
|
|
|
Advanced Mezzanine Card handles |
|
 Elma Electronic has introduced Advanced Mezzanine Card (AMC) injector/ejector handles.
|
|
Read more...
|
|
|
I/O terminals replace switches and potentiometers in control cabinets |
|
 In order to add manual functions into the standard Beckhoff Bus Terminal I/O system, Beckhoff has introduced new KM series terminals for convenient switch and pot functions.
|
|
Read more...
|
|
|
Miniature 6 A SPST and DPST rockers |
|
|
 NKK Switches has expanded its line of rocker-style switches to include the CWSB series of miniature, snap-in mounted rockers.
|
|
Read more...
|
|
|
Square drive reaction torque transducers |
|
 To verify the amount
of rotational torque applied by heavy power tools, for example, these
stationary (non-rotating) transducers permit accurate confirmation of
static and dynamic torque. The RTM 2208 and 2209 transducers can be
used while the device under test may be rotating, such as calibrating
torque wrenches used in make-up and breakout of drill strings in
oilfield applications.
|
|
Read more...
|
|
|
Rugged transit rack cases |
|
 Optima EPS has announced new transit rack cases for safe and reliable
transport of electronic systems in rugged environments. The first in
the line of the company's E-TR cases come in 4U and 12U heights.
|
|
Read more...
|
|
|
Explosion combination motor starter with modular trip blocks |
|
 New to the Adalet family of explosionproof motor control enclosures
& systems is a decreased footprint combination starter with
modular, interchangeable trip blocks. Using Moeller's PKZ2 plug-in trip
modules, Adalet can now provide a much smaller, universal enclosure for
Size 0 through Size 3 explosionproof combination starter requirements.
|
|
Read more...
|
|
|
Motor solves challenges for robust, high temperature applications |
|
 BEI Kimco Magnetics recently met the challenging high-performance motor
requirements for a Down Hole Measurement While Drilling (MWD)
application. With oil companies drilling deeper than ever before to
obtain increasingly valuable deposits, components within the drill tool
must deliver reliable operation at the most extreme ambient
temperatures.
|
|
Read more...
|
|
|
Linear actuators for packaging and automotive applications |
|
 Nook Industries has introduced its
Series 500 programmable linear actuator that offers an expanded range
of performance in generating higher loads, longer life, increased duty
cycles, higher speed and programmability. Developed by Nook’s Precision
Actuator Group, the series offers versatility, precision and control
for a broad range of market applications (including military, packaging
and automotive).The
new Series 500 offers an optional external linear position sensor (LPS)
that provides intelligent, programmable positioning and verification
feedback for both parallel and higher speed in-line configurations.
Load capacities range up to 550 lbs. for in-line configurations with
parallel configurations ranging up to 1,000 lbs. and offering stroke
lengths ranging from 2”-to-24” (with custom lengths available upon
request).The
Series 500 actuator is designed to be configured with stepper or servo
motors and controls− supplied either as a complete system (including
motors and controls); or simply with just a motor. Ball screw driven
designs are available for continuous high-speed, high-cycle rate
applications and can operate at speeds up to 25 inches per second. Acme
screw driven designs are available for low duty cycle applications
where self-locking is desired to hold the load without the use of a
brake or loss of power.Additional LPS benefits include:- Easy interfacing: choice of analog or self-interrogating PWM signals.- Low power needs: allows use with printed circuit-level supplies of +5 Vdc.- No drift: no periodic re-calibration needed.- Optional supply voltages: allows use in +12 Vdc systems- Customizable reading direction- Forward or reverse acting analog output allows match to control requirements.
www.nookindustries.com
For more on DPN Motion Control, click here
|
|
|
Sanitary colloid mills flow-thru design assures consistency |
|
 Sanitary wet-mixing
colloid mills that process all particles through a single mixing head
for precise size reduction, consistency and repeatability are available
from Bematek Systems, Inc. |
|
Read more...
|
|
|
Pneumatic and electric actuated ball valves |
|
 Omega introduces the
compact, light weight BVP70/BVP80 series features a stainless steel
external trim and FKM O-Rings standard. It
is designed to operate using an air supply of 3.5 to 8.6 bar (50 to 125
psi) and the direct valve stem coupling to actuator shaft minimizes
backlash. Electric actuators feature two ½ NPT conduit ports and
integral thermal overload protection. Suitable for water, chemical
industries and automotive testing, process control applications.
www.omega.ca
For more on DPN Fluid Power Products, click here
|
|
|
Plastic composite compression springs |
|
 Lee Spring
introduces LeeP Plastic Composite Springs, a breakthrough in spring
technology. LeeP is Lee Spring’s answer to increased customer requests
for springs that combine the strength of metal with the special
attributes of high performing engineered thermoplastics. After years of
extensive engineering design and materials research by their expert
technical team, Lee Spring developed these unique compression springs.
LeeP springs are fabricated in distinctive formulations of Ultem PEI
resins. |
|
Read more...
|
|
|
Proximity sensors for safety and security applications |
|
 Small size of Hermetic’s PRX+3800
and PRX+3900 sensors responds to market need for smaller components in
automation, detection and control applications.
|
|
Read more...
|
|
|
Piston pumps for hydraulic fan drives |
|
 The 18 and 28 cc P1/PD Series piston pumps from Parker Hannifin are
design optimized for open-circuit applications, in order to enhance the
performance of hydraulic fan drive systems. |
|
Read more...
|
|
|
Vacuum suction cups prevent air loss |
|
|
A line of vacuum suction
cups featuring button probe valves which only open when a cup touches a
load to provide faster attach-and-release, while preventing air loss,
is available from Anver Corp.
|
|
Read more...
|
|
|
Infrared thermometer with patented circle/dot laser sighting and wireless USB |
|
 Omega introduces the handheld OS-DT8855W, the infrared thermometer is a non-contact temperature measurement instrument that features a laser circle/dot sight. |
|
Read more...
|
|
|
Smallest mobile hydraulic sensor even more compact |
|
 MTS Systems Corp., Sensors
Division has made its smallest mobile hydraulic sensor, the Temposonics
MS linear-position sensor, even more compact by reducing the dead zone
length by more than an inch.
The newly designed, more compact MS sensor will replace the previous
design, which was already the most compact, embeddable magnetostrictive
mobile hydraulic sensor on the market. The MS sensor’s smaller design
will enable it to fit into even tighter package spaces, dramatically
increasing its range of applications.
Although MTS has reduced the dead zone on the MS sensor by a
significant 27mm (1.06"), decreasing its length from 63.5mm (2.5") to
36.5mm (1.44"), the sensor maintains all of the previous design’s
reliability specifications.
The new, more compact MS sensor, like the previous design, is an
absolute, non-contact, linear-position sensor. Rated for up to 100g of
shock and 15g of vibration, the MS sensor was designed for harsh
environments, particularly those within construction, agriculture, and
other off-highway machinery. Along with the high shock and vibration
ratings, the MS sensor features 100V/m EMI protection and provides a
measuring range of 50 to 2,000mm (1.97" to 78.7").
www.mtssensors.com
For more on Sensors, click here |
|
|
Extremely high density 200 W power pack |
|
 Maxon’s RE 50 results
in detent-free running and minimized mass inertia. The combination of a
two-pole Neodymium permanent magnet with the patented maxon winding
technology results in high torque and remarkable acceleration. |
|
Read more...
|
|
|
Chlorine dioxide and free chlorine sensors |
|
 Omega’s CLDTX series of chlorine dioxide sensors and FCLTX series of free chlorine sensors feature amperometric measurement technology.
|
|
Read more...
|
|
|
Comprehensive line of fan accessories including cords, filters and guards |
|
 Orion Fans offers a comprehensive line of fan accessories. Orion's
fan accessories include steel wire and wire mesh finger guards, filter
kits and plastic guards, fan cords and daisy chains, and 3-conductor
and custom AC power cords. |
|
Read more...
|
|
|
High-performance hybrid stepper motors |
|
 AMETEK announces the MAE brand Size 34 (Model HS 200) hybrid stepper motors exhibit superior torque characteristics to power a wide range of industrial equipment applications. Their low detent torque to holding torque ratios serve to deliver smooth and quiet operation and the fine positioning capability required for microstepping.
|
|
Read more...
|
|
| << Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>
| | Results 1 - 25 of 958 |
|
DPN Resource Centre of Online Services |
|
|
|
Digital Catalogues |
|
FREE Clippard Miniature Pneumatic Products Catalog
Request full-line catalog of over 5,000 miniature pneumatic and electronic control devices including air cylinders, valves, fittings, FRLs, actuators, hose and more.
|
|
Daemar Inc.
Your online source for Shaft Seals, O-Rings, Retaining Rings, Bushings, Shaft Repair Sleeves, Shim, Keystock, Mechanical Seals, Braided Packing and Protective Closures. |
|
|
|
|
Videos |
|
SolidWorks Video Library
See how SolidWorks' powerful tools can help you design, validate, manage, and document your products. |
|
|
|
|
Seminars |
|
Safe Motion
The application of drive-based safety functions increases worker protection and productivity. |
|
|
|
|
|
|
 |
|
|
|
|
|
