|
Tension control bore brakes |
|
|
|
|
 Large bore brakes from Magtrol are hysteresis brakes that contain an
inside diameter that can accommodate wire feed directly through the
brake, while the rotor is mounted to a tape supply reel to provide the
required tension. The brakes consist of two primary parts: a pole/case
assembly and a rotor.
The pole/case assembly is usually mounted in a stationary position within the machine, while the rotor is shaft mounted concentrically within the pole/case assembly. Torque is independent of speed, and is available in ratings up to 12 Nm, speed capabilities up to 3000 rpm and intermittent loads up to 2400 W.
magtrol.com
|
