Oseco's discs tests myth on MythBusters

Written by  Dan Comand April 08, 2010

MythBusters has once again turned to rupture disc manufacturer Oseco for help in busting a myth.

This time, the TV show used Oseco’s rupture discs to test the protection that water provides from explosions.

The Discovery Channel’s MythBusters puts myths found in urban legend and movies to the test under real world conditions, to see if they are “Confirmed,” “Plausible” or “Busted.” In the latest episode entitled “Dive to Survive,” the show’s cast attempted to determine the truth behind a movie-inspired myth that a person can dive beneath water to avoid injury from a nearby explosion.

The show used Oseco rupture discs that were calibrated to burst at 13 psi, which is the force required to cause harm to the human body. The discs were placed on buoys floating five, 10, 20 and 50 feet from an explosion set on the surface of a lake to measure the force of the resulting shockwave. Each buoy had three rupture disc rigs set at five feet above water and five and 10 feet below water. Three increasingly powerful explosions, culminating in the detonation of 50 pounds of TNT, were set off at the planned epicenter and the post-explosion conditions of the discs were recorded.

The MythBusters noted that, even with the most powerful explosion, both underwater discs on the buoy floating 50 feet away from the explosion were intact, while the above water disc on same buoy had ruptured. The show analyzed these results and determined that water does have a shielding effect, thus classifying this myth as “Plausible.”

Besides its standard range of disc sizes, Oseco offers custom manufacturing such as the specially designed rupture discs used on the show. Oseco staff was on-site during the shoot to provide engineering expertise and ensure that the equipment was installed and operating properly.

This most recent episode is Oseco’s third appearance on the show. In its MythBusters debut, the company’s bursting discs demonstrated that an underwater explosion would generate enough force to kill a swimmer 75 feet away, proving the end of the movie Deep Blue Sea was impossible in real life. Oseco’s discs were also used to prove that if exposed to a force that would “knock your socks off,” the person wouldn’t survive the force of impact.

www.oseco.com

For more DPN News, click here

Add comment


Security code
Refresh

  • Digital Catalogues
    • Daemar Inc.
      Your online source for Shaft Seals, O-Rings, Retaining Rings, Bushings, Shaft Repair Sleeves, Shim, Keystock, Mechanical Seals, Braided Packing and Protective Closures.

Featured Videos

More Videos...

  • Piston sealing systems reduce friction

    Simrit has developed the Friction Piston Seal T-ring (TR) 200. With the low friction piston seal TR 200, Simrit presents an innovative sealing geometry for the smooth operation of pneumatic cylinders with significantly increased efficiency. Reducing friction by up to 50% compared to conventional systems, the low friction piston seal TR 200 shows minimal wear after 15 million cycles. The dynamic sealing function of the low friction piston seal TR 200 is achieved by a sealing area with a large radius.

    www.simrit.com

    See Video...
  • Rugged cavity monitoring system design assists in mining operations and worker safety

    GeoSight president John Lupton demonstrates his MINEi cavity monitoring system. The system provides 3D data to calculate the volume of underground voids and is controlled on the system’s tablet computer that can adjust for scanning resolution, dusty conditions and types of terrain. 

    See Video...
  • James Dyson Foundation boosts Science World B.C. Science World British Columbia recently received a boost with the creation of a North American first: the Engineering Lab by the James Dyson Foundation. Founder James Dyson talks about the importance of attracting young people to technology and technical career opportunities.
    See Video...
  • HARTING 10G RJ45 and han-speed M12 connectors demonstration Steve Loyal, Business Development Manager, Device Connectivity Solutions, at HARTING North America, explains new connector offerings field-installable 10G Industrial Ethernet RJ45 and han-speed M12.
    See Video...
  • Siemens PLM Software Canada's new president & CEO interviewed Brian Mori, the new president & CEO of Siemens PLM Software, Canada, understands how technology can help the country's manufacturing sector compete on the global stage. DPN Editorial Director Mike Edwards sat down with him at the company's headquarters in Mississauga, ON, earlier this month in this exclusive interview.
    See Video...