GM recalling 1.5M vehicles, 100,000+ in Canada, over fire concerns
Written by Dan Comand June 09, 2010
General Motors Co. said Tuesday it was recalling
about 1.5 million vehicles worldwide to address a problem with a heated
windshield wiper fluid system that could lead to a fire, its second
recall over the issue in two years.
-
The recall affects several pickup trucks, sport utility vehicles, crossovers and passenger car models from the 2006 to 2009 model years. GM conducted a similar recall in 2008 but came across new reports of fires in vehicles that had been fixed.
GM said it would disable the heated washer fluid system module that could lead to fires. The Detroit automaker will pay owners and those leasing vehicles $100 each since the feature is being disabled.
GM said it was aware of five fires but there had been no injuries or crashes reported. Nearly 1.4 million vehicles are in the U.S. and more than 100,000 vehicles are in Canada, Mexico and other international markets.
"While our analysis shows the number of incidents is very small compared with the number of vehicles on the road, we want our customers to have complete peace of mind," said Jeff Boyer, GM's executive director of safety.
The recall covers the 2006-2009 model year Buick Lucerne, Cadillac DTS, and Hummer H2; 2008-2009 Buick Enclave and Cadillac CTS; 2007-2009 Cadillac Escalade, Escalade ESV and Escalade EXT; 2007-2009 Chevrolet Avalanche, Silverado, Suburban and Tahoe; 2007-2009 GMC Acadia, Sierra, Yukon and Yukon XL; 2007-2009 Saturn Outlook; and 2009 Chevrolet Traverse.
The auto company said customers will begin to receive recall letters later this month but can contact their dealer to make an appointment to have the heated washer system removed. Dealers will remove the heated washer fluid module and reroute washer fluid hoses.
GM said the technology, which helps melt ice in freezing temperatures, was available from only one supplier, Microheat Inc., of Farmington Hills, Mich., which went out of business, preventing GM from working with another supplier on an improved design.
GM recalled more than 900,000 vehicles because of the heated washer fluid system in August 2008 because a short circuit on the circuit board could overheat the ground wire. The National Highway Traffic Safety Administration had opened an investigation in February 2008 into 2007 Yukon and Tahoe vehicles over potential engine compartment fires.
The government closed its investigation after the 2008 recall but GM later came across fires in vehicles that had been fixed under the previous recall, prompting the latest safety action.
Owners can contact Buick at (866) 608-8080, Cadillac at (866) 982-2339, Chevrolet at (800) 630-2438, Saturn at (800) 972-8876, GMC at (866) 996-9463 and Hummer at (800) 732-5493.
www.gmownercenter.com
For more DPN News, click here
The recall affects several pickup trucks, sport utility vehicles, crossovers and passenger car models from the 2006 to 2009 model years. GM conducted a similar recall in 2008 but came across new reports of fires in vehicles that had been fixed.
GM said it would disable the heated washer fluid system module that could lead to fires. The Detroit automaker will pay owners and those leasing vehicles $100 each since the feature is being disabled.
GM said it was aware of five fires but there had been no injuries or crashes reported. Nearly 1.4 million vehicles are in the U.S. and more than 100,000 vehicles are in Canada, Mexico and other international markets.
"While our analysis shows the number of incidents is very small compared with the number of vehicles on the road, we want our customers to have complete peace of mind," said Jeff Boyer, GM's executive director of safety.
The recall covers the 2006-2009 model year Buick Lucerne, Cadillac DTS, and Hummer H2; 2008-2009 Buick Enclave and Cadillac CTS; 2007-2009 Cadillac Escalade, Escalade ESV and Escalade EXT; 2007-2009 Chevrolet Avalanche, Silverado, Suburban and Tahoe; 2007-2009 GMC Acadia, Sierra, Yukon and Yukon XL; 2007-2009 Saturn Outlook; and 2009 Chevrolet Traverse.
The auto company said customers will begin to receive recall letters later this month but can contact their dealer to make an appointment to have the heated washer system removed. Dealers will remove the heated washer fluid module and reroute washer fluid hoses.
GM said the technology, which helps melt ice in freezing temperatures, was available from only one supplier, Microheat Inc., of Farmington Hills, Mich., which went out of business, preventing GM from working with another supplier on an improved design.
GM recalled more than 900,000 vehicles because of the heated washer fluid system in August 2008 because a short circuit on the circuit board could overheat the ground wire. The National Highway Traffic Safety Administration had opened an investigation in February 2008 into 2007 Yukon and Tahoe vehicles over potential engine compartment fires.
The government closed its investigation after the 2008 recall but GM later came across fires in vehicles that had been fixed under the previous recall, prompting the latest safety action.
Owners can contact Buick at (866) 608-8080, Cadillac at (866) 982-2339, Chevrolet at (800) 630-2438, Saturn at (800) 972-8876, GMC at (866) 996-9463 and Hummer at (800) 732-5493.
www.gmownercenter.com
For more DPN News, click here
Latest from Dan Comand
- WEG Automation Fault Analyzer for iPhone, Android and Blackberry
- Two auto industry majors honor KUKA Systems for supplier excellence
- Creaform introduces C-Link for faster and easier inspection of complex parts
- Mitsubishi Electric Automation debuts dedicated packaging website
- Québec's aerospace sector honours its commitment to encouraging students to stay in school
|
|
|
Featured Videos
-
Philip Harting, senior vice president of Harting Inc., spoke with DPN editorial director Mike Edwards at last week's Hannover Messe 2012. Harting spoke about the importance of the annual trade fair, the emergence of his company on the global stage, the need for corporate governance on carbon dioxide emissions and on Harting energy management technologies.
-
See Video...
Harting has launched its RJ Industrial 10G Ethernet connector. Rated IP20 for the office IT environment, the lockable, 8-wire RJ45 requires no tools or expertise to assemble. An angled version is also available.
-
See Video...
With Creo 2.0, PTC has introduced a new role-specific app supporting modular product design that extends how organizations can approach concept design, and is said to deliver significant productivity enhancements to its existing Creo apps. Raphael Nascimento, PTC product management manager, explains.
-
See Video...
The live video signal from a Pepperl+Fuchs LS680 Ethernet optical data coupler on an automated storage and retrieval system can be used to correctly position the pallet within minutes from a remote location like a control room.
-
See Video...
Demonstration of SpaceClaim Engineer 2012, a multi-purpose 3D CAD tool that performs direct modeling operations on parts and assemblies.
-
See Video...
At Hannover Messe 2012, Andre Brauers, Turck Industrial Automation product manager for linear position sensors, encoders and inclinometers, describes the latest in rotary position sensing technology.
Popular Articles
