Miniature pushbuttons with LED illumination
-
font size
decrease font size
increase font size
NKK Switches
announced the availability of the MB2400 Series of miniature,
snap-acting, snap-in mount pushbuttons. The series provides a
comprehensive array of options designed to suit any application
requiring a unique combination of innovative design and aesthetic appeal
at an affordable cost.-
There are three bezel options that feature built-in LEDs. Choices range from one round LED to two round LEDs to two rectangular LEDs. The LEDs enable MB2400 Series switches to be used to indicate status at a glance.
As another way to provide engineers with the opportunity to customize their MB2400 Series devices, the 11.5mm square pushbutton caps are available in seven colors and adding legends is a simple process, with NKK featuring a wide range of legend options.
The series, which also features a short stroke, light touch and audible feedback, provides engineers with not only a wide range of options, but also high reliability. Mechanical life for the MB2400 Series is rated at 200,000 operations minimum.
The anti-jamming design of these miniature pushbuttons, protect the contacts from damage due to any excessive downward force on the actuator. Also, prominent insulating barriers increase insulation resistance and dielectric strength.
In addition, the stainless steel construction resists corrosion and the epoxy sealed terminals prevent the entry of flux and other contaminants.
Available in single pole or double pole, ON (ON) momentary circuits, engineers can specify gold, silver or gold over silver contacts. These devices are rated at 3A @ 125V AC with silver contacts, 0.4VA maximum @ 28V AC/DC with gold contacts or both ratings when gold over silver contacts are specified. Terminal options include solder lug or straight PC.
NKK offers these push-button switches completely pre-assembled at no additional charge. Panel cut-out sizes range from 13.1mm x 15mm to 18.4mm x 15mm.
The MB2400 is rated UL94-V0 for flammability, and meets UL and CSA standards.
www.nkkswitches.com
For more DPN Switches, click here
There are three bezel options that feature built-in LEDs. Choices range from one round LED to two round LEDs to two rectangular LEDs. The LEDs enable MB2400 Series switches to be used to indicate status at a glance.
As another way to provide engineers with the opportunity to customize their MB2400 Series devices, the 11.5mm square pushbutton caps are available in seven colors and adding legends is a simple process, with NKK featuring a wide range of legend options.
The series, which also features a short stroke, light touch and audible feedback, provides engineers with not only a wide range of options, but also high reliability. Mechanical life for the MB2400 Series is rated at 200,000 operations minimum.
The anti-jamming design of these miniature pushbuttons, protect the contacts from damage due to any excessive downward force on the actuator. Also, prominent insulating barriers increase insulation resistance and dielectric strength.
In addition, the stainless steel construction resists corrosion and the epoxy sealed terminals prevent the entry of flux and other contaminants.
Available in single pole or double pole, ON (ON) momentary circuits, engineers can specify gold, silver or gold over silver contacts. These devices are rated at 3A @ 125V AC with silver contacts, 0.4VA maximum @ 28V AC/DC with gold contacts or both ratings when gold over silver contacts are specified. Terminal options include solder lug or straight PC.
NKK offers these push-button switches completely pre-assembled at no additional charge. Panel cut-out sizes range from 13.1mm x 15mm to 18.4mm x 15mm.
The MB2400 is rated UL94-V0 for flammability, and meets UL and CSA standards.
www.nkkswitches.com
For more DPN Switches, click here
Tagged under
|
|
|
Featured Videos
-
Philip Harting, senior vice president of Harting Inc., spoke with DPN editorial director Mike Edwards at last week's Hannover Messe 2012. Harting spoke about the importance of the annual trade fair, the emergence of his company on the global stage, the need for corporate governance on carbon dioxide emissions and on Harting energy management technologies.
-
See Video...
Harting has launched its RJ Industrial 10G Ethernet connector. Rated IP20 for the office IT environment, the lockable, 8-wire RJ45 requires no tools or expertise to assemble. An angled version is also available.
-
See Video...
With Creo 2.0, PTC has introduced a new role-specific app supporting modular product design that extends how organizations can approach concept design, and is said to deliver significant productivity enhancements to its existing Creo apps. Raphael Nascimento, PTC product management manager, explains.
-
See Video...
The live video signal from a Pepperl+Fuchs LS680 Ethernet optical data coupler on an automated storage and retrieval system can be used to correctly position the pallet within minutes from a remote location like a control room.
-
See Video...
Demonstration of SpaceClaim Engineer 2012, a multi-purpose 3D CAD tool that performs direct modeling operations on parts and assemblies.
-
See Video...
At Hannover Messe 2012, Andre Brauers, Turck Industrial Automation product manager for linear position sensors, encoders and inclinometers, describes the latest in rotary position sensing technology.
Popular Articles
