Signal conditioner for position measurement
-
font size
decrease font size
increase font size
Novotechnik’s MUP400 is a signal conditioner for position measurement with a 16-bit resolution and accuracy of √Ǭ±0.01 of range +1 digit. This computer controlled signal conditioner is used to convert potentiometric input signals into standardized voltage or current signals. The signal conditioner supplies the position sensors with a constant, highly stable voltage. The MUP400 has a high sample rate of up to 5 kHz.
Users can select either 0 to 10 V or 4 to 20m A outputs by setting a DIP switch.
Auto-calibration of the MUP400 is achieved by pressing two buttons on the front of the device to set offset as well as span. The span can be limited to 80% of the total input range that allows for standardized output signals to be adjusted if the maximum travel or angle of the sensor is not completely utilized. The MUP400 also has low temperature drift of 25 ppm/K.
The MUP400 is designed for a standard DIN EN 50022 mounting rail fixture and is available with electrical isolation as an option. Its dimensions are 90.5 x 79 x 25 mm and it has a working temperature range of 0 to 60 °C and a supply voltage of 18 to 30 VDC.
www.novotechnik.com
Auto-calibration of the MUP400 is achieved by pressing two buttons on the front of the device to set offset as well as span. The span can be limited to 80% of the total input range that allows for standardized output signals to be adjusted if the maximum travel or angle of the sensor is not completely utilized. The MUP400 also has low temperature drift of 25 ppm/K.
The MUP400 is designed for a standard DIN EN 50022 mounting rail fixture and is available with electrical isolation as an option. Its dimensions are 90.5 x 79 x 25 mm and it has a working temperature range of 0 to 60 °C and a supply voltage of 18 to 30 VDC.
www.novotechnik.com
Tagged under
|
|
|
Featured Videos
-
Philip Harting, senior vice president of Harting Inc., spoke with DPN editorial director Mike Edwards at last week's Hannover Messe 2012. Harting spoke about the importance of the annual trade fair, the emergence of his company on the global stage, the need for corporate governance on carbon dioxide emissions and on Harting energy management technologies.
-
See Video...
Harting has launched its RJ Industrial 10G Ethernet connector. Rated IP20 for the office IT environment, the lockable, 8-wire RJ45 requires no tools or expertise to assemble. An angled version is also available.
-
See Video...
With Creo 2.0, PTC has introduced a new role-specific app supporting modular product design that extends how organizations can approach concept design, and is said to deliver significant productivity enhancements to its existing Creo apps. Raphael Nascimento, PTC product management manager, explains.
-
See Video...
The live video signal from a Pepperl+Fuchs LS680 Ethernet optical data coupler on an automated storage and retrieval system can be used to correctly position the pallet within minutes from a remote location like a control room.
-
See Video...
Demonstration of SpaceClaim Engineer 2012, a multi-purpose 3D CAD tool that performs direct modeling operations on parts and assemblies.
-
See Video...
At Hannover Messe 2012, Andre Brauers, Turck Industrial Automation product manager for linear position sensors, encoders and inclinometers, describes the latest in rotary position sensing technology.
Popular Articles
