Four-axis amplifier
-
font size
decrease font size
increase font size
Galil Motion Control has introduced the AMP-19540, a four-axis amplifier capable of driving up to four brush or brushless motors up to 500 W each. The amplifier can attach to the Galil DMC-18xx PCI bus, DMC-21x0 or Galil Optima controllers that use a 100-pin SCSI connector and cable.
The 6.8 x 8.75 x 1 in. unit is designed to sit outside of the PC, interfacing to the PCI bus motion controller with a single, 100-pin high density SCSI cable. The signals for each axis are extracted via through D-type connectors located on the amplifier. It features four transconductance PWM amplifiers, each capable of driving brush or brushless motors operating at 18 to 80 Vdc, up to 7 A continuous, 10 A peak. The gain setting is configured with jumpers, and the PWM switching frequency is 60 kHz.
electromate.com
electromate.com
Tagged under
|
|
|
Featured Videos
-
Philip Harting, senior vice president of Harting Inc., spoke with DPN editorial director Mike Edwards at last week's Hannover Messe 2012. Harting spoke about the importance of the annual trade fair, the emergence of his company on the global stage, the need for corporate governance on carbon dioxide emissions and on Harting energy management technologies.
-
See Video...
Harting has launched its RJ Industrial 10G Ethernet connector. Rated IP20 for the office IT environment, the lockable, 8-wire RJ45 requires no tools or expertise to assemble. An angled version is also available.
-
See Video...
With Creo 2.0, PTC has introduced a new role-specific app supporting modular product design that extends how organizations can approach concept design, and is said to deliver significant productivity enhancements to its existing Creo apps. Raphael Nascimento, PTC product management manager, explains.
-
See Video...
The live video signal from a Pepperl+Fuchs LS680 Ethernet optical data coupler on an automated storage and retrieval system can be used to correctly position the pallet within minutes from a remote location like a control room.
-
See Video...
Demonstration of SpaceClaim Engineer 2012, a multi-purpose 3D CAD tool that performs direct modeling operations on parts and assemblies.
-
See Video...
At Hannover Messe 2012, Andre Brauers, Turck Industrial Automation product manager for linear position sensors, encoders and inclinometers, describes the latest in rotary position sensing technology.
Popular Articles
