Vacuums adjust to lift heavy and lightweight objects
-
font size
decrease font size
increase font size
EXAIR’s Adjustable E-Vac product is a series of low cost, compressed air powered vacuum generators where the vacuum and flow rates can be adjusted to suit the application requirements. The vacuum pumps are suitable for a wide variety of “pick-and-place,” box opening, clamping, lifting, chucking and surface mounting applications. They are maintenance free and have no moving parts to wear out.
Engineered for high efficiency, the Adjustable E-Vac minimizes compressed air use by allowing it to be tuned to the application. With a simple turn of the unit, the vacuum and flow levels can be changed to overcome porosity and increase or decrease the lifting power, the company says. The straight-through, single stage aluminum construction requires no vacuum filter and passes contaminants from dirty environments through the unit so there is no clogging or loss of suction.
Adjustable E-Vac is available in 4 sizes that have adjustable vacuum rates up to 25 in. Hg (85 kPa) and flow rates up to 81 SCFM (2294 SLPM). Kit configurations that include vacuum cups, fittings, tubing and a mounting clip are available.
www.exair.com/adjevac.htm
Adjustable E-Vac is available in 4 sizes that have adjustable vacuum rates up to 25 in. Hg (85 kPa) and flow rates up to 81 SCFM (2294 SLPM). Kit configurations that include vacuum cups, fittings, tubing and a mounting clip are available.
www.exair.com/adjevac.htm
Tagged under
|
|
|
Featured Videos
-
Philip Harting, senior vice president of Harting Inc., spoke with DPN editorial director Mike Edwards at last week's Hannover Messe 2012. Harting spoke about the importance of the annual trade fair, the emergence of his company on the global stage, the need for corporate governance on carbon dioxide emissions and on Harting energy management technologies.
-
See Video...
Harting has launched its RJ Industrial 10G Ethernet connector. Rated IP20 for the office IT environment, the lockable, 8-wire RJ45 requires no tools or expertise to assemble. An angled version is also available.
-
See Video...
With Creo 2.0, PTC has introduced a new role-specific app supporting modular product design that extends how organizations can approach concept design, and is said to deliver significant productivity enhancements to its existing Creo apps. Raphael Nascimento, PTC product management manager, explains.
-
See Video...
The live video signal from a Pepperl+Fuchs LS680 Ethernet optical data coupler on an automated storage and retrieval system can be used to correctly position the pallet within minutes from a remote location like a control room.
-
See Video...
Demonstration of SpaceClaim Engineer 2012, a multi-purpose 3D CAD tool that performs direct modeling operations on parts and assemblies.
-
See Video...
At Hannover Messe 2012, Andre Brauers, Turck Industrial Automation product manager for linear position sensors, encoders and inclinometers, describes the latest in rotary position sensing technology.
Popular Articles
